Skateboard.
How to Do the Skateboard Rail stand Trick
Tips To Help You Achieve This Trick
If you do flatland skateboarding, then you will want to try some of the tricks available for flatland skateboarding. Some of the tricks here are easy for some skateboarders to do while there are other skateboarders that find them hard to perform.
Before you learn tricks, it is important that you wear your proper skateboarding safety gears. You have to remember that skateboarding is indeed a painful sport. If you are just learning to do a trick, there is a big chance that you will fall and experience pain.
Wear your helmet and pads to avoid sustaining serious injuries related to skateboarding, such as head trauma and broken bones.
One popular flatland skateboarding trick is called the Railstand. In this trick, the skateboarder will stand on the edge of his or her skateboard. The skateboard will be on its side with the wheels facing the side.
Also called Primo or Primo Stall, this skateboard trick can be easy to do for some skateboarders while some find it hard to execute properly. The great thing about this trick is that you don't need to know how to Ollie to perform it. So, if you are already riding your skateboard comfortably but you still don't know how to do the Ollie, you will still be able to try out this flatland skateboard trick.
There are two types of Railstands. The first is the Toeside Railstand and the other is the Heelside Railstand. The Toeside Railstand is a bit easier than the Heelside Railstand. To perform this trick, you will need a flat surface, such as your driveway, your garage or even your living room.
First, you will need to put one foot over each truck. Then, push on your toes and jump up. This will tilt the skateboard and you will need to land on the edge of the skateboard.
The Heelside Railstand is a little trickier to do than the latter. To do this easily, try taking your back foot off the skateboard. Then, put the load of this foot right on the side of the back wheel or the trucks. In one smooth motion, jump off the skateboard where your toes will pull the skateboard on its side and land on the side of your skateboard with both feet.
These are the different ways to do Railstands. As you can see, they are quite easy to do. With enough practice, you will be able to do them effortlessly.
If you do flatland skateboarding, then you will want to try some of the tricks available for flatland skateboarding. Some of the tricks here are easy for some skateboarders to do while there are other skateboarders that find them hard to perform.
Before you learn tricks, it is important that you wear your proper skateboarding safety gears. You have to remember that skateboarding is indeed a painful sport. If you are just learning to do a trick, there is a big chance that you will fall and experience pain.
Wear your helmet and pads to avoid sustaining serious injuries related to skateboarding, such as head trauma and broken bones.
One popular flatland skateboarding trick is called the Railstand. In this trick, the skateboarder will stand on the edge of his or her skateboard. The skateboard will be on its side with the wheels facing the side.
Also called Primo or Primo Stall, this skateboard trick can be easy to do for some skateboarders while some find it hard to execute properly. The great thing about this trick is that you don't need to know how to Ollie to perform it. So, if you are already riding your skateboard comfortably but you still don't know how to do the Ollie, you will still be able to try out this flatland skateboard trick.
There are two types of Railstands. The first is the Toeside Railstand and the other is the Heelside Railstand. The Toeside Railstand is a bit easier than the Heelside Railstand. To perform this trick, you will need a flat surface, such as your driveway, your garage or even your living room.
First, you will need to put one foot over each truck. Then, push on your toes and jump up. This will tilt the skateboard and you will need to land on the edge of the skateboard.
The Heelside Railstand is a little trickier to do than the latter. To do this easily, try taking your back foot off the skateboard. Then, put the load of this foot right on the side of the back wheel or the trucks. In one smooth motion, jump off the skateboard where your toes will pull the skateboard on its side and land on the side of your skateboard with both feet.
These are the different ways to do Railstands. As you can see, they are quite easy to do. With enough practice, you will be able to do them effortlessly.
Skateboard.
How to Choose Your First Skateboard
What To Buy And What To Avoid
Now that you are taking an interest in skateboarding, the first thing that you will think about is buying a skateboard that you can practice on. Sure there are quite a lot of cheap skateboards available but you should be warned that cheap means dangerous.
Don't buy cheap skateboards from the toy store or from your nearest superstore. What this means is that you should not buy skateboards that are mass produced by companies that have little concern about the quality of the products they produce.
By nature, you have to face the fact that skateboards are dangerous. So, you wouldn't want to buy a cheap skateboard that is poor in quality which will make it even more dangerous to ride on especially when you plan on practicing your tricks on it.
Cheap skateboards will usually mean weak trucks, poor quality wheels that can break easily, freezing bearings, and boards that break easily. Good skateboard manufacturers will spend a lot of time to make the skateboards that are safer, better and last longer.
Instead of that mass produced cheap skateboard, try to buy a complete pro grade skateboard. This is high in quality and will last a lot longer. It will feel more comfortable when you ride it. Usually, skateboards like this will cost around $120. There are specific skateboard brands that you can choose from. If you are not sure which one to buy, try to take a look at skateboard brand reviews on the internet. It will give you an idea which brands will suit your riding needs best.
You can also try building your own pro grade skateboard. You can purchase the board, trucks, wheels, and bearings separately. This will allow you to get the best boards, trucks and wheels.
If you don't want to shell out a lot of cash, you will see that there are also good quality skateboards out there that aren't as expensive as the pro grade ones but not as cheap as the mass produced ones.
If you are buying your kid his or her first skateboard, you can cut some corners. However, never buy the $20 skateboards at your nearest superstore or toy store. For sure, you want the best quality skateboard for your kids. Although it shouldn't be the pro grade ones, you should get one that is of good quality.
These are the things that you have to remember when buying skateboards. If you want to prevent accidents and serious injuries, you might want to invest a little more money on the skateboard you purchase.
Now that you are taking an interest in skateboarding, the first thing that you will think about is buying a skateboard that you can practice on. Sure there are quite a lot of cheap skateboards available but you should be warned that cheap means dangerous.
Don't buy cheap skateboards from the toy store or from your nearest superstore. What this means is that you should not buy skateboards that are mass produced by companies that have little concern about the quality of the products they produce.
By nature, you have to face the fact that skateboards are dangerous. So, you wouldn't want to buy a cheap skateboard that is poor in quality which will make it even more dangerous to ride on especially when you plan on practicing your tricks on it.
Cheap skateboards will usually mean weak trucks, poor quality wheels that can break easily, freezing bearings, and boards that break easily. Good skateboard manufacturers will spend a lot of time to make the skateboards that are safer, better and last longer.
Instead of that mass produced cheap skateboard, try to buy a complete pro grade skateboard. This is high in quality and will last a lot longer. It will feel more comfortable when you ride it. Usually, skateboards like this will cost around $120. There are specific skateboard brands that you can choose from. If you are not sure which one to buy, try to take a look at skateboard brand reviews on the internet. It will give you an idea which brands will suit your riding needs best.
You can also try building your own pro grade skateboard. You can purchase the board, trucks, wheels, and bearings separately. This will allow you to get the best boards, trucks and wheels.
If you don't want to shell out a lot of cash, you will see that there are also good quality skateboards out there that aren't as expensive as the pro grade ones but not as cheap as the mass produced ones.
If you are buying your kid his or her first skateboard, you can cut some corners. However, never buy the $20 skateboards at your nearest superstore or toy store. For sure, you want the best quality skateboard for your kids. Although it shouldn't be the pro grade ones, you should get one that is of good quality.
These are the things that you have to remember when buying skateboards. If you want to prevent accidents and serious injuries, you might want to invest a little more money on the skateboard you purchase.
Fishing.
Learn How to Fish?
You have decided that you want to learn to fish. There are several ways of learning, the hardest being trial and error. It would be best to find an instructor for one-on-one lessons.
1. Buy Seasickness Medication
Nothing is worse than ruining your fishing because of seasickness. Most seasickness medication e.g. Bonine would be fine. Even seasoned fishermen are known to take some on rough days. Take one before you go to sleep, another when you wake up and a third one before you board.
2. Buy A Reference Book
A lot of good books are available at your bookstores and online. The book should give you instructions as well as terms and definitions. Some things you may not immediately understand but you should know anyway. Learn how to tie different kinds of knots. This knowledge will be invaluable for other purposes throughout your life.
3. Go To A Party
There are party boats that carry from fifteen to as many as sixty anglers. The boat provides everything like bait, rod, reel, sinkers and hooks. They assist you in fishing and take the fish off the hook for you. Mates will spot you and will generally stay close to assist you. Party boats generally will cost you $25 - $70 a day, and the fish are yours to keep. The party boat is a bargain for beginners.
4. Pick Your Pier
Assuming you have already acquired skills to operate a rod and reel, you need to look for a fishing pier.
Majority of coastal cities have one public pier or pay-to-fish pier. You can rent tackle and buy bait at the piers. If you're having trouble, there are many pier anglers willing to help and give you tips.
5. Party Or Pier
You may want to do either step three or four or both at this point. The best thing to do is to do both several times to really learn.
6. The Reel Deal
The conventional reel is probably what you're using up to this point. The conventional reel is designed for a lot of wear and tear. You may now want to consider other types and makes of reels. Ideally you have met people and perhaps made a friend or two who can assist you in selecting a reel. You can even ask a tackle shop owner for tips.
You need to understand the mechanics of the reel and the other equipment. Learning to cast, tie knots and bait are not that complicated. Secondly, you need to learn where to fish. Successful fishermen know where the fish are located. Fish move from place to place and knowledgeable anglers understand these patterns and are able to anticipate where the fish are located.
1. Buy Seasickness Medication
Nothing is worse than ruining your fishing because of seasickness. Most seasickness medication e.g. Bonine would be fine. Even seasoned fishermen are known to take some on rough days. Take one before you go to sleep, another when you wake up and a third one before you board.
2. Buy A Reference Book
A lot of good books are available at your bookstores and online. The book should give you instructions as well as terms and definitions. Some things you may not immediately understand but you should know anyway. Learn how to tie different kinds of knots. This knowledge will be invaluable for other purposes throughout your life.
3. Go To A Party
There are party boats that carry from fifteen to as many as sixty anglers. The boat provides everything like bait, rod, reel, sinkers and hooks. They assist you in fishing and take the fish off the hook for you. Mates will spot you and will generally stay close to assist you. Party boats generally will cost you $25 - $70 a day, and the fish are yours to keep. The party boat is a bargain for beginners.
4. Pick Your Pier
Assuming you have already acquired skills to operate a rod and reel, you need to look for a fishing pier.
Majority of coastal cities have one public pier or pay-to-fish pier. You can rent tackle and buy bait at the piers. If you're having trouble, there are many pier anglers willing to help and give you tips.
5. Party Or Pier
You may want to do either step three or four or both at this point. The best thing to do is to do both several times to really learn.
6. The Reel Deal
The conventional reel is probably what you're using up to this point. The conventional reel is designed for a lot of wear and tear. You may now want to consider other types and makes of reels. Ideally you have met people and perhaps made a friend or two who can assist you in selecting a reel. You can even ask a tackle shop owner for tips.
You need to understand the mechanics of the reel and the other equipment. Learning to cast, tie knots and bait are not that complicated. Secondly, you need to learn where to fish. Successful fishermen know where the fish are located. Fish move from place to place and knowledgeable anglers understand these patterns and are able to anticipate where the fish are located.
Fishing.
Using A Fishing Rod
Rods are basically made from carbon. Plastic, composite carbon combined with Kevlar, which is a kind of material that is bullet proof, or just high carbon. Since the carbon's force and strength in connection to its mass is light, making it strong material that can allow thinner fabrication but still is able to keep the span and length. A rod that is lighter evidently handling will be easier, controlling it would be less tiring on ones arms and reduces resistance to air giving one an easier time accurately casting it, particularly on windy ways.
Rods come in silicon carbide, hard chrome or ceramic rings having a function of letting the line pass through. These are precisely used because of their smoothness having the function to minimize friction when passing through the line and keep the maximum strength. Silicon materials are a fact costly, so an alternative is bring into play ceramic rings like Zircon which when taken in to account, it is not as tough or as light, but is much cost effective. Rings made of chrome are better, although every season they require replacement, they do deliver excellent job of line running. At least thirteen rings are needed from the handle all through the tip, lesser near the handle, needing more close to the tip. The line can fasten itself to the rod, if you don’t have enough rings.
When determining length of the rod, you want to take into account exactly what kind of fishing you want. If you want far out fishing, in that case choose a larger rod as this will offer you better control when you are playing the fish. If you are planning to go fishing in an area that is enclosed, you will need a shorter rod. Normally, the safe rod size to choose is13ft (3.9m). This is lengthy enough for a waggler but does not cast out too far.
Handles
Handles are made from either cork or foam. Whichever you choose, this is a matter of preference. Just try handling both materials so you can have a good “feel” before buying it.
Action
Action is the term used in describing how the rod will bend when it is placed under the lot of strain and effort of a fighting fish.
There are two types of tip on a rod, the hollow and spliced tips. Hollow tips are good in catching carp, tench and chub which have a progressive or developing action making it sharp for quick bites, yet proficient enough to manage long distance strikes. Spliced tips normally are normally spliced to the end with two feet solid carbon. This rod is sharper so it is a good pick for fast acting fish.
When choosing a rod, these questions will help you pick the right one:
1. How frequent and where do you fish? Are you a beginner, a weekend warrior, or a tournament pro? If you are just starting out, you may need to budget and spend less money on your first rod. Once you learn the techniques and once you have decided that fishing is for you, that is the time to spend on more specific rods.
2. Freshwater or Saltwater fish? While there are a few rods that can be used for both fresh and saltwater fish, most rods are made for a specific purpose and application.
3. Spinning or Casting? The species you that you choose to chase will determine it.
4. Power, sensitivity, and your technique. The rod should match the way you enjoy fishing. If you like to fish with lures, then you should look for a rod that is comfortable enough to cast frequently all day long.
Rods come in silicon carbide, hard chrome or ceramic rings having a function of letting the line pass through. These are precisely used because of their smoothness having the function to minimize friction when passing through the line and keep the maximum strength. Silicon materials are a fact costly, so an alternative is bring into play ceramic rings like Zircon which when taken in to account, it is not as tough or as light, but is much cost effective. Rings made of chrome are better, although every season they require replacement, they do deliver excellent job of line running. At least thirteen rings are needed from the handle all through the tip, lesser near the handle, needing more close to the tip. The line can fasten itself to the rod, if you don’t have enough rings.
When determining length of the rod, you want to take into account exactly what kind of fishing you want. If you want far out fishing, in that case choose a larger rod as this will offer you better control when you are playing the fish. If you are planning to go fishing in an area that is enclosed, you will need a shorter rod. Normally, the safe rod size to choose is13ft (3.9m). This is lengthy enough for a waggler but does not cast out too far.
Handles
Handles are made from either cork or foam. Whichever you choose, this is a matter of preference. Just try handling both materials so you can have a good “feel” before buying it.
Action
Action is the term used in describing how the rod will bend when it is placed under the lot of strain and effort of a fighting fish.
There are two types of tip on a rod, the hollow and spliced tips. Hollow tips are good in catching carp, tench and chub which have a progressive or developing action making it sharp for quick bites, yet proficient enough to manage long distance strikes. Spliced tips normally are normally spliced to the end with two feet solid carbon. This rod is sharper so it is a good pick for fast acting fish.
When choosing a rod, these questions will help you pick the right one:
1. How frequent and where do you fish? Are you a beginner, a weekend warrior, or a tournament pro? If you are just starting out, you may need to budget and spend less money on your first rod. Once you learn the techniques and once you have decided that fishing is for you, that is the time to spend on more specific rods.
2. Freshwater or Saltwater fish? While there are a few rods that can be used for both fresh and saltwater fish, most rods are made for a specific purpose and application.
3. Spinning or Casting? The species you that you choose to chase will determine it.
4. Power, sensitivity, and your technique. The rod should match the way you enjoy fishing. If you like to fish with lures, then you should look for a rod that is comfortable enough to cast frequently all day long.
Fishing.
Fishing In Salt Water
There will always be challenges whether one decides to fish either in the river or in the open sea. The important thing to remember is to have patience waiting for the fish and doing your best to catch it when it appears.
To be able to fish, a person needs to get a fishing license since this is a requirement by law and the regulations regarding fishing varies from one state to the other.
The first thing one needs for salt water fishing is a boat. It can range from a simple row boat to a yacht. The size of this vessel depends on how many people will join the trip.
For people who will do it in-shore, a 15 foot sailboat that comes with a cuddy forward to serve as a shelter when it rains should do the job. The boat should not be heavy and yet adequately sturdy to not be swayed by the action of strong waves or some bumps on the beach or on the rocks.
One should always try the edges of the perimeter first instead of plopping bait or lure in the middle. This is because it will scare the other fish away. By going through the sides first, one will have a better chance of catching unsuspecting fish in the middle.
If one decides to go "down below" some time, a cod-line is a necessity for everybody to enjoy saltwater fishing. A perch-line will also be good and if it's time for mackerel fishing, a mackerel jig will be an excellent help.
The right time to start salt water fishing is on the ebb tide. This should be during an early time of the morning to ensure that the trip will be a productive one. This will put the tide in one’s favor and if the wind is light or not fair, this will also help in going home quickly.
The best place to start fishing is going to a fishing ground that is well known to the locals.
Many anglers who are too impatient move from one spot to another which at times make these people miss a hotspot further decreasing the chances of catching fish. It is advisable to cast out a couple of times before moving on using different types of bait. This should be done from the shallowest to the deepest point.
Sharks in the area can disrupt people from catching fish. By pouring some fish blood on a paper towel or newspaper and rolling it into a ball then casting it overboard, sharks will follow the current and leave the area increasing the chances of catching fish.
To be able to fish, a person needs to get a fishing license since this is a requirement by law and the regulations regarding fishing varies from one state to the other.
The first thing one needs for salt water fishing is a boat. It can range from a simple row boat to a yacht. The size of this vessel depends on how many people will join the trip.
For people who will do it in-shore, a 15 foot sailboat that comes with a cuddy forward to serve as a shelter when it rains should do the job. The boat should not be heavy and yet adequately sturdy to not be swayed by the action of strong waves or some bumps on the beach or on the rocks.
One should always try the edges of the perimeter first instead of plopping bait or lure in the middle. This is because it will scare the other fish away. By going through the sides first, one will have a better chance of catching unsuspecting fish in the middle.
If one decides to go "down below" some time, a cod-line is a necessity for everybody to enjoy saltwater fishing. A perch-line will also be good and if it's time for mackerel fishing, a mackerel jig will be an excellent help.
The right time to start salt water fishing is on the ebb tide. This should be during an early time of the morning to ensure that the trip will be a productive one. This will put the tide in one’s favor and if the wind is light or not fair, this will also help in going home quickly.
The best place to start fishing is going to a fishing ground that is well known to the locals.
Many anglers who are too impatient move from one spot to another which at times make these people miss a hotspot further decreasing the chances of catching fish. It is advisable to cast out a couple of times before moving on using different types of bait. This should be done from the shallowest to the deepest point.
Sharks in the area can disrupt people from catching fish. By pouring some fish blood on a paper towel or newspaper and rolling it into a ball then casting it overboard, sharks will follow the current and leave the area increasing the chances of catching fish.
Fishing.
Fishing for Ree!
Being surrounded by nature’s beauty can be fun. One can do it at the beach, in a luxury resort or just traveling out of town. Fishing is another good activity one can choose to do to bond more with either family or friends.
There will always be challenges whether one decides to fish either in the river or in the open sea. The important thing to remember is to have patience waiting for the fish and doing the best to catch it when it appears.
To be able to fish, a person needs to get a fishing license since this is requirement by law and the regulations regarding fishing varies from one state to the other.
Once that has been acquired, it is time now to get the proper equipment to start reeling in the fish.
The fishing reel was invented centuries ago. It dates back to the 17th century though some historians have discovered that the Chinese started using it as early as the 12th century. Until the 1800’s, the purpose of the reel was just a storage space for the excess line. This was later improved and various models were invented using different materials such as brass and nickel which are still in use today.
There are 2 things one should consider before buying the right reel,
1. Where Will The Person Fish?
There are many kinds of fishing reels available. The model used for fishing in the river or stream is quite different from those who have experience and go fishing as a sport in the open sea.
It is advisable for beginners to just get the basic package and have fun before moving on to more advanced equipment.
2. Will Buying A Fishing Reel Fit Within Ones Budget?
With the many models available and after figuring out what kind of fishing reel one needs, it all depends on how much it costs and if that person is willing to spend it. Fishing takes a lot of practice before being able to excel at it. One can purchase a new reel either online or at the local store. Another way to get started could be buying a second hand reel first before deciding to buy a brand new one.
Being an expert at fishing won’t happen in one day. It takes practice and patience just waiting for that fish to appear and finally play it out when it appears. One should always remember that in the water and with people, it is all about having fun.
There will always be challenges whether one decides to fish either in the river or in the open sea. The important thing to remember is to have patience waiting for the fish and doing the best to catch it when it appears.
To be able to fish, a person needs to get a fishing license since this is requirement by law and the regulations regarding fishing varies from one state to the other.
Once that has been acquired, it is time now to get the proper equipment to start reeling in the fish.
The fishing reel was invented centuries ago. It dates back to the 17th century though some historians have discovered that the Chinese started using it as early as the 12th century. Until the 1800’s, the purpose of the reel was just a storage space for the excess line. This was later improved and various models were invented using different materials such as brass and nickel which are still in use today.
There are 2 things one should consider before buying the right reel,
1. Where Will The Person Fish?
There are many kinds of fishing reels available. The model used for fishing in the river or stream is quite different from those who have experience and go fishing as a sport in the open sea.
It is advisable for beginners to just get the basic package and have fun before moving on to more advanced equipment.
2. Will Buying A Fishing Reel Fit Within Ones Budget?
With the many models available and after figuring out what kind of fishing reel one needs, it all depends on how much it costs and if that person is willing to spend it. Fishing takes a lot of practice before being able to excel at it. One can purchase a new reel either online or at the local store. Another way to get started could be buying a second hand reel first before deciding to buy a brand new one.
Being an expert at fishing won’t happen in one day. It takes practice and patience just waiting for that fish to appear and finally play it out when it appears. One should always remember that in the water and with people, it is all about having fun.
Subscribe to:
Posts (Atom)